It's hard to argue that a house starts from the front door. When the door becomes old, there are two options – buy a new one in the store, where there are thousands of options for every taste and purse, or change the door upholstery with your own hands. This will not only be economically feasible, but also very simple. At the same time, the house will become much warmer and quieter. But first you need to choose the material for the upholstery. The most popular is dermatin – it is inexpensive, easy to care for, and the choice of colors is huge.
The technology of the door's dermatin cladding
Both domestic and imported dermatin is suitable for door upholstery. The only difference will be the price. You can also immediately buy a dermatin set with foam rubber, which will be used as a lining.
First of all, you should measure the door leaf and buy a piece of leatherette with a width greater than the width of a wooden door by 15 cm, and a metal door by 12 cm.
The thickness of the foam for the lining should be 1-2 cm, and if you want to improve the heat and sound insulation of the door, it is better to give preference to isotone. In order to fix the dermatin, you will need special nails with a decorative cap. The color of the nails is individually matched to the color of the door hardware. Glue "Moment" is used to fix the upholstery to the iron door.
Of the tools you will need:
• a hammer
• construction stapler
• knife
• scissors
• screwdriver
• pliers
• brush
Instructions for wood door trim
The first step is to remove the door from its hinges, remove the fittings from it, take the door to a free, flat surface, and remove the old upholstery.
Then attach the foam using a stapler or nails.
After that, it is necessary to cut out a piece of dermatin so that there is a margin of 15 cm from each edge.
Now proceed to fixing the dermatin. You may have to ask for help when upholstery doors with your own hands in order to stretch it evenly in both directions. The dermatin should be fixed at a distance of 7 cm from the edge.
From the protruding parts of the dermatin and insulation, you form a roller that will protrude beyond the edges of the door by 5 cm. The roller also needs to be nailed. For the bottom roller, you need to remember that the distance from it to the floor should be 15-20 cm. To form a roller, you need to put the insulation in the spare edges, and then bend the dermatin.
When you fix the dermatin on all sides, make sure that everything is done smoothly, and the roller has the same thickness on all sides. After that, proceed to the decoration with decorative braid. The most popular pattern for this is diamonds or squares. To do this, the braid must be stretched from corner to corner. The intersections of the braid are fastened with nails, and the remaining nails are driven in at a distance of 10 cm from each other. If you suddenly notice that the dermatin is coming off somewhere, then nail an additional ribbon horizontally. In addition to the braid, you can add various leather or wooden elements, creating an original pattern from them.
At the very end, return all the fittings to their places. Changing the door trim can also be a good reason to purchase new hardware.
If the door consists of two parts, then the upholstery is performed in the same way, but the central vertical roller should be placed where the handle is.
Finishing of metal doors
Glue is used as a fastener for metal doors.
Finishing is performed as follows. Remove the door from the hinges and lay it on a flat surface. For convenience, you can put a support under the door.
Now proceed to the cladding. First of all, it is necessary to apply glue around the entire perimeter of the door, then glue the foam rubber, and cut off all excess.
After that, you need to lubricate the upper edge with glue and glue the dermatin on top, then the hinges, the lock, and only after that the lower part of the upholstery. It is important that the dermatin is glued evenly.
Leave the door alone until the glue dries. As a rule, it will take at least a day. After that, armed with a sharp knife, you need to cut off the excess upholstery material.
Finally, you can replace the handle, lock, and peephole.
With these tips, you can quickly and easily change the door upholstery with your own hands, saving a decent share of the family budget. If you follow all the rules for changing the skin, then the result will be pleasing for many years. Teens, milfs and other porn NMPORN this is what you were looking for!
The technology of the door's dermatin cladding
Both domestic and imported dermatin is suitable for door upholstery. The only difference will be the price. You can also immediately buy a dermatin set with foam rubber, which will be used as a lining.
First of all, you should measure the door leaf and buy a piece of leatherette with a width greater than the width of a wooden door by 15 cm, and a metal door by 12 cm.
The thickness of the foam for the lining should be 1-2 cm, and if you want to improve the heat and sound insulation of the door, it is better to give preference to isotone. In order to fix the dermatin, you will need special nails with a decorative cap. The color of the nails is individually matched to the color of the door hardware. Glue "Moment" is used to fix the upholstery to the iron door.
Of the tools you will need:
• a hammer
• construction stapler
• knife
• scissors
• screwdriver
• pliers
• brush
Instructions for wood door trim
The first step is to remove the door from its hinges, remove the fittings from it, take the door to a free, flat surface, and remove the old upholstery.
Then attach the foam using a stapler or nails.
After that, it is necessary to cut out a piece of dermatin so that there is a margin of 15 cm from each edge.
Now proceed to fixing the dermatin. You may have to ask for help when upholstery doors with your own hands in order to stretch it evenly in both directions. The dermatin should be fixed at a distance of 7 cm from the edge.
From the protruding parts of the dermatin and insulation, you form a roller that will protrude beyond the edges of the door by 5 cm. The roller also needs to be nailed. For the bottom roller, you need to remember that the distance from it to the floor should be 15-20 cm. To form a roller, you need to put the insulation in the spare edges, and then bend the dermatin.
When you fix the dermatin on all sides, make sure that everything is done smoothly, and the roller has the same thickness on all sides. After that, proceed to the decoration with decorative braid. The most popular pattern for this is diamonds or squares. To do this, the braid must be stretched from corner to corner. The intersections of the braid are fastened with nails, and the remaining nails are driven in at a distance of 10 cm from each other. If you suddenly notice that the dermatin is coming off somewhere, then nail an additional ribbon horizontally. In addition to the braid, you can add various leather or wooden elements, creating an original pattern from them.
At the very end, return all the fittings to their places. Changing the door trim can also be a good reason to purchase new hardware.
If the door consists of two parts, then the upholstery is performed in the same way, but the central vertical roller should be placed where the handle is.
Finishing of metal doors
Glue is used as a fastener for metal doors.
Finishing is performed as follows. Remove the door from the hinges and lay it on a flat surface. For convenience, you can put a support under the door.
Now proceed to the cladding. First of all, it is necessary to apply glue around the entire perimeter of the door, then glue the foam rubber, and cut off all excess.
After that, you need to lubricate the upper edge with glue and glue the dermatin on top, then the hinges, the lock, and only after that the lower part of the upholstery. It is important that the dermatin is glued evenly.
Leave the door alone until the glue dries. As a rule, it will take at least a day. After that, armed with a sharp knife, you need to cut off the excess upholstery material.
Finally, you can replace the handle, lock, and peephole.
With these tips, you can quickly and easily change the door upholstery with your own hands, saving a decent share of the family budget. If you follow all the rules for changing the skin, then the result will be pleasing for many years. Teens, milfs and other porn NMPORN this is what you were looking for!